Pizza Wheel and Wedge Tool

Many loop installers use screwdrivers, paint mixers, sticks, or other tools to stuff saw-cut loops into saw-cut grooves. These tools are not only inefficient, they can knick the loop wire and cause a loop to short to ground.
Save your back and knees with the Pizza Wheel and Wedge Tool!


The BD Loops Pizza Wheel and Wedge Tool allows installers to quickly and easily roll loop wire into the bottom of the saw-cut groove while standing. It is made of smooth and durable PVC that will not knick the loop wire.
The flat and angled wedge tools allow installers to easily push wire down into 135 dog eared corner cuts. The Pizza Wheel and Wedge Tool is designed to work best with BD Loops 3/16” Preformed Loops.


The Pizza Wheel and Wedge Tool has a ¾” PVC coupler to accept any length ¾” PVC handle, we suggest the use of Schedule 80 PVC conduit. Check out the Pizza Wheel and Wedge Tool in action:

    • Designed for saw-cut depth up to 2 1/4 inches.
    • Quickly and easily roll the loop to the bottom of the saw-cut groove.
    • The Pizza Wheel & Wedge Tool can also be used to help clean out the saw-cut groove.
    • Dog ear corner block allows installers to quickly mark the dog ear corners, simply trace around the block with the included with the included construction crayon.

 

 

 

 

 

 

 

 

 

Pizza Wheel and Wedge Tool