3/16″ Pro Diamond Blades

Product
Literature

Safety
Instructions

description

BD Loops offers a variety of high quality 3/16” wide blades in 14” and 7” diameters.

Uses

Used for cutting a 3/16” wide saw-cut slot in concrete or asphalt for saw-cut loop installation.

Techincal Specs

14″ Diameter Blades

Blade Width3/16″ (.1875″)
Machine HorsepowerUp to 25 hp
Arbor SizeRound 3/4″ to 1″ (has knockout)
PinholeYes
Spin DirectionMarked with Arrow
Asphalt Blade Part#SB-A
Combo Blade Part#SB-B
Concrete Blade Part#SB-C

7″ Diameter Blade

Blade Width3/16″ (.1875″)
For Use WithHandheld Skill Saws
Arbor SizeWorm Drive 5/8″ to 7/8″ (has knockout)
PinholeNo
Spin DirectionMarked with Arrow
Concrete Blade Part#SB-B7

Superior Features

· High quality, long lasting saw blades.

· 7” or 14” Diameters available.

· Wet or dry cutting—wet cutting preferred for
extended blade life.

· Diamond bonds and segments formulated to work best with chosen surface type (Concrete, Asphalt, or Combo/Both).

· Save on gas, sealant, and cutting time vs. 1/4” blades.

Compare blades TO find THE best blade FOR you

Blade TypeDiamond BondWhen Used in AsphaltWhen Used in Concrete
Asphalt
Part#
SB-A		Hard
Bond		 The asphalt blade will have a long life and cut quickly because the hard bond will prevent the diamond layers from shedding quickly.
 		Will cut slow and eventually glaze up and stop cutting. The blade will continue to be unusable until it is run through an asphalt surface to deglaze the blade.
Combo
Part#
SB-B		Medium BondWill cut asphalt slightly quicker than the specialized asphalt blade but at the cost of reduced life of the blade.Will cut concrete but not as quickly as the specialized concrete blade.
Concrete
Part#
SB-C		Soft
Bond		Will quickly cut asphalt surfaces but will cause the blade to wear down rapidly and drastically reduce the life of the blade by shedding diamonds prematurely.The concrete blade will have a long life and cut quickly because the soft bond will allows the diamonds to always be open and ready for cutting.