Loop Sealant Needed Calculator
This calculator is designed to determine the amount of sealant needed when installing a
BD Loops Preformed 3/16″ Saw-Cut Loop.
This calculator will not calculate an accurate amount of sealant needed for hand-wrapped loops.
For lead-in length enter the length you expect to seal.
Sealant product
BD-LS
30 fl oz tube
BD-LG2
600ml dual cartridge
Loop configuration
| No. of loopsLoops | Loop perimeter (ft)Perim (ft) | Lead-in length (ft)Lead (ft) | Row totalTotal |
|---|
Cut specifications
Enter the depth of your saw cut
Recommended cut depth is 1.25″–1.5″. Deeper cuts will require significantly more sealant.
BD Loops recommends cutting at a depth between 1.25″–1.5″. If you would like to discuss your application give us a call at 714-723-0946.
Wire fills groove bottom — minimum sealant needed
Results
Total to seal
—
linear feet
Volume needed
—
fluid ounces
Tubes needed
—
30 fl oz tubes