Pizza Wheel and Wedge Tool
A time saving tool for installing BD Loops Preformed 3/16” Saw-Cut Loops. Roll loop wire into the slot while standing. Remove stubborn rocks from the saw-cut slot. Quickly mark your dog-ear corners.
For use when installing BD Loops Preformed 3/16” Saw-Cut Loops. Not designed for use with hand wrapped loops.
How Does It Work?
Many loop installers use screwdrivers, paint mixers, sticks, or other tools to stuff saw-cut loops into saw-cut slots. These tools are not only inefficient, but they can also nick the loop wire and cause a loop to short to ground.
Save your back and knees with the Pizza Wheel and Wedge Tool!
The BD Loops Pizza Wheel and Wedge Tool allows installers to quickly and easily roll loop wire into the bottom of the saw-cut slot while standing. It is made of smooth and durable PVC that will not nick the loop wire. It can also be used to help clean the saw-cut slot and remove stubborn rocks and pebbles from the saw-cut slot.
The flat wedge tools allow installers to push wire down into the 135° dog-ear corner cuts. The Pizza Wheel and Wedge Tool is designed to work with BD Loops 3/16” Preformed Saw-Cut Loops.
The Pizza Wheel and Wedge Tool has a ¾” PVC coupler to accept any length ¾” PVC handle. We suggest the use of Schedule 80 PVC conduit. The Metal Clean Out Hook can be screwed onto a 1” threaded Metal Pipe.
· 1/8” Wide Smooth PVC Pizza Wheel for pushing wire into the saw-cut slot.
· Flat Aluminum Wedge Tool for pushing wire into the dog ear corner cuts.
· Metal Clean Out Hook can be used to help remove stubborn rocks and pebbles from saw-cut slot.
· Wood Dog-Ear Corner Block for marking the 5 ½ x 5 ½ x 7 ¾ dog ear corners cutting pattern. (Construction crayon included)